TK-635
Color Terminal

Display
Monitor
Standard VGA color monitor.
Support 800x600 resolution LCD Analog signal input monitor.

Color
16 foreground and 16 background colors.

Frequency
31.50KHz or 48.1KHz horizontal frequency.

Refresh
70 Hz or 72 Hz vertical retrace.

Format
Multiple display formats.

Data lines
24 x 80/132, 25 x 80/132
On screen, 1st is status line.
26th is label line.
42x80/132,43x80/132.
On screen, 1st is status line.
44th is label line.

Border
16 colors

Character font
Native Mode font.
PC Standard.
PC Multinational.
Standard ASCII.
Standard ANSI.
Graphics font.
Four banks down loadable soft font of 128 characters each.

Character attributes
Blink, Reverse, Underline, High light/ Dim, Invisible and any combination.

Cursor attributes
Block or Underline, blink, steady or off, 16 colors.



Line attributes

Double height, double width, combination programmable.

Emulations

WY-120/60, 325, 50+;
TVI910+, TVI925; PC TERM; PCG ALPHA, ADDS A2; VT52, VT100, VT 220; Console ANSI

Communication

Two serial port connector type
One for host on the 25-pin female connector with RS-232C. One For serial printer on the 9-pin male connector with RS-232C.

Baud rates
75 to 460K bps

Format
7 or 8 data bits with or without parity. 1 or 2 stop bits.

Mode
Full Duplex, Half Duplex, Half
block and block.

Protocol
Software Handshake: Xon/Xoff, Xpc, Hardware handshake DTR pin.

One printer port connectorType Parallel port on the 25-pin female connector.

Keyboard

Interface
Enhanced PC/AT KB interface.

Type
Standard PC/AT KB 101/102 keys.



Function key

12 programmable function keys.

Environment

Temperature
Operating: 5 oC to 40 oC
Storage: -40
oC to 60 oC

Relative Humidity

Operating:
20% to 80% non-condensing

Storage:
20% to 80% non-condensing

Dimensions

Terminal box:
33mm x 315mm x 252mm

Packing

1 Terminal box/Inner box:
67mm x 362mm x 344mm

5 Inner boxes/Carton:
382mm x 364mm x 358mm

Weight

Inner box:
N.W. 2.4 Kgs; G.W. 3.0 Kgs

Carton:
N.W. 15.0 Kgs; G.W. 16.0 Kgs

Regulatory Compliance
Emissions FCC Class A, UL, CE, C-TICK.

Power Requirement
98 - 264 Vac at 47 - 63 Hz




Distribution Deutschland, Österreich, Schweiz:
miller computertechnik
Nürnberger Str. 77a
91220 Schnaittach
Fon: 09153 92269-0
Fax: 09153 92269-22
info@miller.de

TERMTEK is a registered trademark and TK-735 is trademark of TERMTEK COMPUTER CO., LTD. WY-50+, WY-60, and WY-120 are trademarks of Wyse Technology, Inc. TVI-910+ and TVI-925 are trademarks of Televideo Systems, Inc. ADDS Viewpoint A2 is a trademark of Applied Digital Data System, Inc. VT-52, VT-100, and VT-220 are trademarks of Digital Equipment Corp. IBM PC/AT is a trademark of International Business Machines.Specification are subject to change by TERMTEK without notice and are not intended as a guarantee or warranty. © 1999 TERMTEK.